دستور العمل های بهره برداری و نت کوپلینگ های دنده ای OZGUN MAKINA



ASSEMBLY

• Be sure coupling is clean at assembly.
• Check the right assembly distance (G). Wrong assembly distance could block axial capability of coupling.
• All O-rings (3) should be covered from heat during shrink fit of shaft to hub.
• Align the coupling (1, 2, 3) with laser shaft alignment equipment to prevent maximum axial and angular misalignments. Lifetime of coupling will be too short in case of usage of couplings out of specified misalignment tolerances.
• Couplings bore tolerance should be machined up to shafts tolerance to prevent much clearance what causes additional force on keyway.
• Type of grease used in it's intended use in accordance with the following table (at high temperatures, necessarily heavy-duty) should be selected, and qty from catalogue

DISASSEMBLING and INSPECTION

• Disassembly and check gears (1, 2) and O-rings (3) and alignment at each 8.000 hours or 2 years ..

OPERATION and MAINTENANCE

• Grease should be added every 90 days, but especially the usage at high-temperature places more frequent and continuous follow-up periods should be replaced. Empty grease once in a year and clear inside of the coupling with solvent, then add new grease again as specified qty on catalogue.
• Sealing equipments should be checked every lubrication and too sclerous or warned O-rings (3) should be changed immediately. In case of disassembly is not possible, O-rings could be pasted endwise.



BRAND CODE FOR HEAVY DUTY
ERALUBE ERAGREASE LOADMASTER 2 X
ERALUBE ERAGREASE RSE/MC-HV X
ERALUBE ERAGREASE RSE/MC-MOL Y X
ERALUBE ERAMOL Y 2 PLUS  
SHELL ALVANIA GREASE EP MOS  
MOLYKOTE BR2 PLUS  
KLUEBER UNIMOLI GL 82  
BP ENERGREASE L21-M